FILTER
CARTRIDGES
S-1
Series Pleated Cellulose Sediment
- Pleated design maximizes
dirt-holding capacity
- Designed for general
water filtration purposes
- Economically priced
- Nominal 20-micron
rating
Materials of
Construction:
- Filter Media: Resin
Impregnated Cellulose
- End Caps: Vinyl
Plasticsol
- Core: Polypropylene
- Netting: Polypropylene
- Temperature Rating:
40°F to 145°F (4.4°C to 63°C)
DGD
Series Dual-Gradient Density
- Manufacturing from
pure 100% pure polypropylene
- Designed for purity,
with bacteria and chemical resistance
- Two separate gradient
density layers enhance cartridge performance
- Three times the
dirt-holding capacity of similar sized sediment cartridges
Materials of Construction
- Filter Media: Polypropylene
- Temperature Rating:
40°F to 145°F (4.4°C to 63°C)
P
Series Spun=Bonded Polypropylene
- Manufacturing from
pure 100% polypropylene
- Designed for purity,
bacteria and chemical resistance
- Spun fibers form
a true gradient density from outer to inner surfaces
Materials of Construction
- Filter Media: Polypropylene
Fibers
- Temperature Rating:
40°F to 145°F (4.4°C to 63°C)
Poltdepth™
Polypropylene Sediment
- Quality polypropylene
filter media
- Will not impart
taste, odour or colour
- Superior chemical
resistance. Not prone to bacterial attack
- Compatible with
a wide range of industrial filtration
- Available in a wide
range of micron ratings and lengths
Materials of Construction
- Filter Media: Polypropylene
Fibers
- Temperature Rating:
40°F to 175°F (4.4°C to 79.4°C)
GAC
Series Granular Activated Carbon
- Effective taste,
odour and chlorine reduction
- Designed for maximum
absorption
- Post-filter to reduce
carbon fines
- Available in variety
of sizes and flow rates
Materials of Construction
- Filter Media: Granular-Activated
Carbon
- End Caps: Spun Polypropylene
- Post-filter: Polypropylene
- Outer Casting: Polyester
- Expansion Pad: Polyester
- Gasket: Buna-N (top)
Santoprene (bottom)
- Temperature Rating:
40°F to 125°F (4.4°C to 53°C)
C
Series Dual Purpose Powdered-Activated Carbon
- Economically priced
- Provides sediment
filtration and taste, odour and chlorine reduction
- High dirt-holding
capacity
- Available in four
sizes and two micron ratings
Materials of Construction
- Filter Media: PAC
Impregnated Cellulose
- End Caps: Polypropylene
(C8), Vinyl Plasticsol (C1 and C2)
- Core: Polypropylene
- Netting: Polypropylene
- Backing: Polyester
(C8) Cellulose Polyester (C1 & C2)
- Gasket: Buna-N (C8)
(Optional EPR Gaskets)
- Temperature Rating:
40°F to 145°F (4.4°C to 63°C), 40°F to 145°F
(Others)
Back
to Whole House Filters |