Ultra Violet Light Sterilization

Ultraviolet (UV) light systems protect you and your family from waterborne disease-causing microorganisms, without the use of chemicals. UV Innovation designers have utilized sophisticated computer modeling techniques to optimize every aspect of each UV-Innovation model, resulting in premium quality performance that surpasses current public health standards.


Shown here is the UV1 Model 8.40 designed for point of
entry to a home or cottage


Shown here is the UV1 Model 8.40 designed for point of
entry to a home or cottage with prefiltration

What is Ultraviolet sterilization

Water Articles/Information

Why choose UV?

  • The disinfection results are immediate.
  • It does not produce any of the disinfection byproducts that chemical disinfectants may cause.
  • Unlike chemical disinfection, UV has no detrimental effect on taste, odour, or pH of water and there is no danger of producing THM's or overdosing.
  • They are easy to install and maintain.
  • Chlorine resistant Protozoa such as cryptosporidium and giardia are inactivated with UV light.
  • It is environmentally friendly.
  • UV is very safe
Recommended Maximum contaminant levels in water entering a UV treatment device
Turbidity
Suspended solids
Colour
Total Iron
Manganese
Hydrogen sulphide
Hardness

5 NTU
10 mg/L
none
0.3mg/L
0.05mg/L
0.05mg/L
7gpg

Advanced New Ultraviolet Disinfection Unit
UV Innovation systems have been designed to provide end of lamp life dosage of 40 mJ/cm2 at the specified flow rate.

Model
8.40
15.40
25.40
50.40 		Flow rate (USGPM
1 to 8
9 to 15
16 tp 25
26 to 50

Contact Pure North for other sizes

UV Dose Response for Protozoa, Bacteria, Viruses

The above available data indicates that a UV dose of 40mJ/cm2 will give you the protection you need from harmful microorganisms.

Features and Benefits

  • All UV Innovation systems have audible and visual alarms to provide assurance your lamp is activated.
  • All UV Innovation systems includes ITS (Intelligent Temperature Sensor), to ensure superior energy savings and safe water temperature.
  • All UV Innovation systems are configured for Infra Red (IR) data output. This allows for remote alarms as well as being a diagnostic tool.
  • All UV Innovation ballasts are configured with an isolated low voltage solenoid drive. This powers the optional solenoid valve, which ensures that you do not receive untreated water.
  • All UV Innovation Model 8.40 systems are equipped with flow restrictors to ensure that your water receives the optimum UV dosage.
  • All UV Innovation systems use low-pressure/high-output lamps for the highest level of bacterial inactivation
  • The clashed end quartz sleeve for the Model 8.40 simplifies cleaning as the unit does not need to be drained.
  • All UV Innovation systems use stainless steel reactor chambers with an attractive outer coating.
  • Optional UV intensity sensor measures the UV dosage.